tud Renewable energy in North Africa Modeling of future electricity scenarios and the impact on manufacturing and employment 2015-08-26 [Electronic ed.] 4519974-7 Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden prv Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, Dresden Fakultät Wirtschaftswissenschaften Lehrstuhl für Energiewirtschaft male Tübingen The transition of the North African electricity system towards renewable energy technologies is analyzed in this thesis. Large potentials of photovoltaics (PV), concentrating solar power (CSP) and onshore wind power provide the opportunity to achieve a long-term shift from conventional power sources to a highly interconnected and sustainable electricity system based on renewable energy sources (RES). A multi-dimensional analysis evaluates the economic and technical effects on the electricity market as well as the socio-economic impact on manufacturing and employment caused by the large deployment of renewable energy technologies. The integration of renewable energy (RE) into the electricity system is modeled in a linear optimization model RESlion which minimizes total system costs of the long-term expansion planning and the hourly generation dispatch problem. With this model, the long-term portfolio mix of technologies, their site selection, required transmission capacities and the hourly operation are analyzed. The focus is set on the integration of renewable energy in the electricity systems of Morocco, Algeria, Tunisia, Libya and Egypt with the option to export electricity to Southern European countries. The model results of RESlion show that a very equal portfolio mix consisting of PV, CSP and onshore wind power is optimal in long-term scenarios for the electricity system. Until the year 2050, renewable energy sources dominate with over 70% the electricity generation due to their cost competiveness to conventional power sources. In the case of flexible and dispatchable electricity exports to Europe, all three RE technologies are used by the model at a medium cost perspective. The socio-economic impact of the scenarios is evaluated by a decision model (RETMD) for local manufacturing and job creation in the renewable energy sector which is developed by incorporating findings from expert interviews in the RE industry sector. The electricity scenarios are assessed regarding their potential to create local economic impact and local jobs in manufacturing RE components and constructing RE power plants. With 40,000 to 100,000 new jobs in the RE sector of North African countries, scenarios with substantial RE deployment can provide enormous benefits to the labor market and lead to additional economic growth. The deployment of renewable energy sources in North Africa is consequently accelerated and facilitated by finding a trade-off between an optimal technology portfolio from an electricity system perspective and the opportunities through local manufacturing. By developing two model approaches for evaluating the effects of renewable energy technologies in the electricity system and in the industrial sector, this thesis contributes to the literature on energy economics and energy policy for the large-scale integration of renewable energy in North Africa. 330 QR 530 Erneuerbare Energien, Modellierung, Strom Erneuerbare Energien, Nordafrika, Energiesystemmodellierung, Stromsystem, Optimierung, Wertschöpfung, Lokale Fertigung Renewable Energy, North Africa, Energy System Modeling, Electricity System, Optimization, Value Added, Local Manufacturing Abstract iii Acknowledgement iv Table of contents v List of tables ix List of figures xii List of abbreviations xvi 1 Introduction 1 1.1 Renewable energy in North Africa 2 1.2 Research questions and aim of this thesis 3 1.2.1 Modeling of electricity systems 4 1.2.2 Modeling of manufacturing and employment impact 6 1.2.3 Optimal renewable energy scenarios 6 1.3 Related research 7 1.4 Structure of thesis 7 2 Modeling fundamentals for electricity systems with renewable energy sources 9 2.1 Energy system modeling 9 2.2 Electricity models 16 2.2.1 Classifications and taxonomy 17 2.2.2 Differences between operation models and planning models 20 2.2.3 Typical modeling approaches 21 2.3 Optimization models 23 2.3.1 Basic model structure 23 2.3.2 Objective functions of electricity models 24 2.3.3 Technical aspects of electricity systems as models constraints 26 2.3.4 Combining different objectives in energy scenarios 27 2.4 Models for high shares of renewable energy 28 2.5 Models for North African electricity systems 31 2.6 Conclusions for model development 34 3 Electricity system of North Africa 36 3.1 Market structure 36 3.2 National targets for renewable energy 40 3.2.1 Morocco 40 3.2.2 Algeria 41 3.2.3 Tunisia 42 3.2.4 Libya 42 3.2.5 Egypt 43 3.3 Long-term development of electricity demand 44 3.4 Electricity exports to Europe 47 3.5 Geopolitical risks for the electricity system 51 4 Development of the electricity market model RESlion 53 4.1 Model requirements and modeling goals 53 4.2 Modeling of renewable energy technologies 56 4.2.1 Onshore wind power plants and wind resources 59 4.2.2 PV power plants and solar resources 61 4.2.3 CSP plants and solar resources 63 4.2.4 Hydro power plants and energy storage systems 65 4.3 General model approach of RESlion 65 4.4 Model description of RESlion 69 4.4.1 Introduction to the model structure 69 4.4.2 Temporal coverage 70 4.4.3 Objective function 72 4.4.4 Technology independent model constraints 74 4.4.5 Regional electricity exchange: Transmission lines 76 4.4.6 Renewable energy technologies 78 4.4.7 Hydro and storage power plants 80 4.4.8 Uncertainty of input parameters and assumptions 81 4.5 Modeling of expansion planning 83 4.6 Modeling of detailed hourly generation dispatch 83 4.7 Extension options to a Mixed Integer Linear Programming model 84 4.8 Solver selection and implementation environment 85 5 Model-based analysis of future electricity scenarios for North Africa 86 5.1 Scenario assumptions 86 5.2 Scenario definition 89 5.3 Technical and economic input data 94 5.4 Model adjustment 99 5.4.1 Electricity generation in reference year 2010 99 5.4.2 Testing of results with detailed hourly generation dispatch 100 5.5 Electricity scenarios for North Africa by 2050 102 5.5.1 Development of the generation system 102 5.5.2 System and generation costs 106 5.5.3 Site selection of RES generation capacities 108 5.5.4 Regional transmission lines 114 5.5.5 Energy storage systems 118 5.5.6 Technology specific generation 119 5.5.7 CO2 emissions 126 5.6 Sensitivity analyses 126 5.6.1 Adaption of market conditions: Split of electricity markets 127 5.6.2 Technology focus 127 5.6.3 Adaption of cost trends for fossil fuels, transmission lines and storage systems 129 5.7 Technology specific findings for CSP, PV and wind power 131 5.7.1 Typical sites and locations for electricity generation from RES 131 5.7.2 Influence of wind speeds and solar irradiation 131 5.7.3 Interactions with conventional power plants 132 5.8 Electricity scenarios with export to Europe 133 5.9 Discussion of RESlion model and its results 139 6 Model development for socio-economic impact analysis 142 6.1 The idea of combining a cost-optimized electricity system with a socio-economic analysis 142 6.2 Literature review and terminology 145 6.3 Data acquisition and further studies 148 6.4 Model description of RETMD 151 6.4.1 Model objectives 151 6.4.2 Model structure and decision modeling 152 6.4.3 Model limitations and uncertainties 156 6.5 Data input of RETMD 157 6.5.1 Construction of reference power plants 157 6.5.2 Operation of reference power plants 159 6.5.3 Status quo of local manufacturing in recent RE projects 160 6.6 Sensitivity of RETMD on market size and know-how 161 6.7 Discussion of model achievements 163 7 Manufacturing and employment impact of optimized electricity scenarios 165 7.1 Demand scenarios for the RE markets from 2012 to 2030 165 7.2 Economic impact and employment creation 166 7.3 Technology specific development of local manufacturing 168 7.4 Country specific development of local manufacturing 172 7.5 Potentials of local manufacturing in each scenarios 174 7.6 Local economic impact 176 7.7 Local employment impact 177 7.8 Evaluation of scenario results 181 7.9 Electricity system analysis and RE manufacturing: Results and discussion of the combined analysis 183 8 Conclusions and outlook 186 8.1 Conclusion on model developments 186 8.2 Conclusion on renewable energy in North Africa 187 8.3 Outlook and further research 189 9 Bibliography 191 10 Appendix 210 urn:nbn:de:bsz:14-qucosa-176538 45437643X Technische Universität Dresden dgg Technische Universität Dresden, Dresden Christoph Philipp Kost 1982-11-22 aut Dominik Möst Prof. Dr. dgs rev Edeltraud Günther Prof. Dr. rev eng 2014-10-10 2015-06-04 urn:nbn:de:bsz:14-qucosa-141575 007 Schriften des Lehrstuhls für Energiewirtschaft, TU Dresden qucosa:27970 7 born digital Christoph Kost christoph.kost@gmx.de doctoral_thesis Bitte erzeugen Sie mir den persistente URN. Ich füge es dann in das PDF ein und übermittele Ihnen die Gesamtdatei.